Filter Fan and Vent Cleaner

FILTER, FAN & VENT CLEANER is a heavy duty cleaner for
removing dust, dirt, grease, oil and tar deposits!

Highside's Filter Fan and Vent Cleaner is a heavy duty cleaner specially formulated to remove the caked on accumulated dust, dirt, grease, oil, and tar deposits found in the heating, ventilation, air-conditioning, and refrigeration industry.

• Non-Corrosive
• Non-Toxic.
• Safe and Effective Cleaner For All HVAC/R Parts .
• Biodegradable.
• Environmentally Friendly.
• Inexpensive.
• Saves Time and Easy to Use.

Great for...

• Electronic Cells
• Permanent Pre-Filters
• Permanent Air Filters
• Fan Blades, Plastic & Metal
• All Vents & Vent Surfaces
• Equipment Surfaces
• Most Air Cleaning Equipment

Instructions:

For Electronic Cells & Permanent Filters

• When possible, remove filters and electronic cells to be cleaned from equipment to an area where overspray and rinse water will not effect other equipment.
• Spray Filter Fan & Vent Cleaner on all surfaces to be cleaned and let stand for 5 to 10 minutes. Wipe clean or rinse completely with fresh water.
• Allow filters and electronic cells to dry completely before reinstallation

For Vents, Fan Blades & Other Surfaces

• Spray Filter Fan & Vent Cleaner on all surfaces to be cleaned and let stand 2 to 5 minutes.
• Wipe clean with cloth or other appropriate material.
• When possible, rinse thoroughly with fresh water.
• Allow surfaces to dry completely before restarting equipment. Filter Fan & Vent Cleaner is safe for most painted surface. However, it is strongly recommended that an inconspicuous spot be tested before general application.