FILTER, FAN & VENT CLEANER
is a heavy duty cleaner for
removing dust, dirt, grease, oil
and tar deposits!

Highside's Filter Fan and Vent Cleaner is a heavy duty cleaner specially formulated to remove the caked on accumulated dust, dirt, grease, oil, and tar deposits found in the heating, ventilation, air-conditioning, and refrigeration industry.

  • Non-Corrosive
  • Non-Toxic.
  • Safe and Effective Cleaner For All HVAC/R Parts .
  • Biodegradable.
  • Environmentally Friendly.
  • Inexpensive.
  • Saves Time and Easy to Use.

Great for ...

  • Electronic Cells
  • Permanent Pre-Filters
  • Permanent Air Filters
  • Fan Blades, Plastic & Metal
  • All Vents & Vent Surfaces
  • Equipment Surfaces
  • Most Air Cleaning Equipment

 

INSTRUCTIONS:

For Electronic Cells & Permanent Filters

1. When possible, remove filters and electronic cells to be cleaned from equipment to an area where overspray and rinse water will not effect other equipment.

2. Spray Filter Fan & Vent Cleaner on all surfaces to be cleaned and let stand for 5 to 10 minutes. Wipe clean or rinse completely with fresh water.

3. Allow filters and electronic cells to dry completely before reinstallation.

Vents, Fan Blades & Other Surfaces

1. Spray Filter Fan & Vent Cleaner on all surfaces to be cleaned and let stand 2 to 5 minutes.

2. Wipe clean with cloth or other appropriate material.

3. When possible, rinse thoroughly with fresh water.

4. Allow surfaces to dry completely before restarting equipment. Filter Fan & Vent Cleaner is safe for most painted surface. However, it is strongly recommended that an inconspicuous spot be tested before general application.



Filter Fan Product Sheet - PDF

Filter Fan MATERIAL SAFETY DATA SHEET - PDF